QRP-F Message 3961: FS: DSW-II 20 meters

FS: DSW-II 20 meters

[ Follow Ups | Post Followup | Return to QRP Forum ]

Posted by:  Mike Boice KW1ND

Posted On:  12/29/03

Subject:  FS: DSW-II 20 meters

Message Posted:

I recently built a DSW-II 20 meter transceiver that I ordered late in the
summer, but times have changed and I'd like to sell it. It works exactly as
spec'd, including current draw. Factory info is at
http://smallwonderlabs.com/swl_dsw.htm. It's in "like new" condition, with no
scratches or dings. A few days ago I got a 20 meter dipole up in a tree while on
a break at work, and had a nice albeit short QSO with a Florida station, so the rig performs fine.

Pix are available at:
http://www.qsl.net/kw1nd/boardbottom.jpg
http://www.qsl.net/kw1nd/boardtop.jpg
http://www.qsl.net/kw1nd/dswfront.jpg
http://www.qsl.net/kw1nd/dswback.jpg

Originally I was going to mount the board in a different enclosure, and very
gently & carefully removed a small amount of board along each edge. Only
groundplane was removed - no traces were touched. My enclosure idea didn't work out, so I mounted it in the factory case. Due to Dave's primo engineering, the board still fits nice & snug in the factory case, so no worries there. As I mentioned, the rig still functions perfectly - didn't even have to do any troubleshooting! I try very hard to do a nice job on soldering and assembly - I take pride in my work.

I'd like to get $140 for it, including Priority Mail shipping. I'll even
offer a 7-day money back guarantee if you don't like it.

Post a Followup
Name/Call:
E-Mail:
Subject:
Message to Post:
	Use Fixed Width Font (Useful for lining up columns of data in log sheets)
Link URL:	(This can be a link to a web page or anything else.)
Link Name:	(This is an optional description or title for the URL above.)
Picture:	(This must be the full address of a .JPG or .GIF)
	Check this box to receive an e-mail when someone replies to your message