Re: Vectronics vec-1240 transmitter

[ Follow Ups | Post Followup | Return to QRP Forum ]


Posted by:  Gary/W9FNB

Posted On:  05/26/03

Subject:  Re: Vectronics vec-1240 transmitter

Message Posted:
    In Reply to: Re: Vectronics vec-1240 transmitter posted by Bill, N4QA on 05/26/03

Thanks Bill for the follow. I have checked the jumbers from rig to watt meter and rig to RX and all appear ok. I have even removed the wattmeter and went straight through with a barrell to my dummy load and the same condition applies output goes away. Logic says something is shorted but I simply can not ID which part. My best VOM is at work, I'll try that tomorrow and see if I can isolate the problem. Thanks if you come up with any other ideas, I am open for suggestions. 73 Gary

Follow Ups:


Post a Followup

Name/Call:
E-Mail:
Subject:
Message to Post:
Use Fixed Width Font (Useful for lining up columns of data in log sheets)
Link URL:
(This can be a link to a web page or anything else.)
Link Name:
(This is an optional description or title for the URL above.)
Picture:
(This must be the full address of a .JPG or .GIF)
Check this box to receive an e-mail when someone replies to your message


 

[ Posting Rules | Follow Ups | Return to QRP Forum ]