POQET PC serial connection [ Follow Ups | Post Followup | Return to QRP Forum ]

Posted by:  Mike, KC8LCY Posted On:  02/23/02 Subject:  POQET PC serial connection Message Posted: Looking at the proprietary connector on this device I realized that a thin double-sided pc board, cut with a dremel tool, or etched, would make a fine substitute for the original proprietary connector which is now unavailable. You won't be able to lock it in like the original, but it's dirt cheap and works. Just don't try the thick G10 boards. The link below is good for the pinouts on these, also. Link:  http://www.njqrp.org/poqetpc/kb2sgm%20review.html

Follow Ups:

Post a Followup
Name/Call:
E-Mail:
Subject:
Message to Post:
	Use Fixed Width Font (Useful for lining up columns of data in log sheets)
Link URL:	(This can be a link to a web page or anything else.)
Link Name:	(This is an optional description or title for the URL above.)
Picture:	(This must be the full address of a .JPG or .GIF)
	Check this box to receive an e-mail when someone replies to your message

[ Posting Rules | Follow Ups | Return to QRP Forum ]