Re: 80m Cub kit.

[ Follow Ups | Post Followup | Return to QRP Forum ]


Posted by:  M0CYX

Posted On:  12/31/01

Subject:  Re: 80m Cub kit.

Message Posted:
    In Reply to: 80m Cub kit. posted by Graham M0CYX on 12/16/01

Graham:

To my knowledge, this is not a design feature. It sounds like it might be connected with a very long RC time constant. Perhaps you have a missing component, or cold solder joint that is forming this long time constant. If so, I would start looking in the power supply output lines, to see if one of the output voltages is rising slowly. Another possibility might be somewhere in the T/R circuitry.

Good luck with finding the problem.

John, KB3WK


Follow Ups:



Post a Followup

Name/Call:
E-Mail:
Subject:
Message to Post:
Use Fixed Width Font (Useful for lining up columns of data in log sheets)
Link URL:
(This can be a link to a web page or anything else.)
Link Name:
(This is an optional description or title for the URL above.)
Picture:
(This must be the full address of a .JPG or .GIF)
Check this box to receive an e-mail when someone replies to your message


 

[ Posting Rules | Follow Ups | Return to QRP Forum ]